Cut Your Underground Dog Fence Installation Time in HALF & Avoid The Back Breaking Task of Burying Wire.
There is no need to spend a weekend burying the wire underground or paying some one hundreds of dollars to bury the boundary wire when it can be installed above ground in only a matter of an hour or two. Each Box contains 100 Staples - enough to install 500 feet of wire. Our Pet Fence Stable can be used;for any brand of underground pet fence.
Using our Pet Fence Staples;you can Staple the wire to the ground. Within a matter of 7 - 14 days the root system of your lawn will grow over the wire and hide it completely from view essentially Burying it into the lawn. Not only does this make the installation of your new pet containment systems hassle free it also eliminates any potential loss of signal that may result from burying the boundary wire under several inches of dirt not to mention the backaches and blisters it will save you.
Using Dog Fence Staples is Quick & Easy
- First run your twisted wire from your transmitter out to the beginning of your boundary.
- Now Staple the twisted wire to the ground by hammering in a wire Staple every 5 - 6 feet.
- Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? If not go and Staple any raised areas before proceeding to the next step. The wire MUST completely touch the ground.
- Next place a Staple where the twisted wire and the beginning of the boundary meet (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a Staple in the